
Toll Free Order Line
1-888-765-1711
9:00am to 5:00pm CST
Monday - Friday

© Copyright
2002-2007, Truck Specialties, Inc
|
| |
|
|
|
Roll n Lock Operation |
|
 |
To Open the
Cover
Place your palms on the tailgate and squeeze the handle to the
tailgate to take pressure off the latches. Turn the lock-lever
clockwise to 10 o'clock and let the cover open slightly.
|
 |
Give the handle a slight push while loosely holding the pull
strap. This will reduce the momentum of the cover as it opens,
while allowing the lock-lever to strike the canister lid with
enough force to cause it to reset. |
|
 |
To Close the
Cover
With the tailgate up, simply pull back on the pull-strap until
the cover either engages the stop positions within the tracks
where you want the cover to stop, or the handle engages the
tailgate lock-strip. |
 |
If closing the cover to the tailgate, make sure to pull back
SMOOTHLY with both hands on the handle so as to make sure both
latches engage the tailgate lock-strip simultaneously. |
|
 |
To secure the contents of the bed, make sure the tailgate is up
before closing the cover. If you wish to close the cover with
the tailgate down, make sure the lock lever is turned to the 7
o'clock ("latched") position, and then gently pull the curtain
back to the last stop position. |
|
 |
Secure the
Pull-Strap
If you intend to drive with your cover even partially open, make
sure the pull-strap is securely fastened at all times. Failure
to do so may result in damage to your truck, your
ROLL-N-LOCK®
retractable cover, or both. |
|
Back To Roll n Lock Main page
|